Installation guide

Fast Track Installation Guide 7. Upgrading the MP-1xx
Version 4.6 31 July 2005
Note: At this point, the process can be canceled with no consequence to the MP-1xx
(click the Cancel button). If you continue the process (by clicking the Start
Software Upgrade button, the process must be followed through and
completed with a MP-1xx reset at the end. If you click the Cancel button in any
of the subsequent screens, the MP-1xx is automatically reset with the
configuration that was previously burned in flash memory.
3. Click the Start Software Upgrade button; the ‘Load a cmp file’ screen appears (Figure 7-2).
Note: When in the Wizard process, the rest of the Web application is unavailable and
the background Web screen is disabled. After the process is completed,
access to the full Web application is restored.
Figure 7-2: Load a cmp File Screen
4. Click the Browse button, navigate to the cmp file and click the button Send File; the cmp file
is loaded to the MP-1xx and you’re notified as to a successful loading (refer to Figure
7-3).
Figure 7-3: cmp File Successfully Loaded into the MP-1xx Notification
5. Note that the four action buttons (Cancel, Reset, Back, and Next) are now activated
(following cmp file loading).
You can now choose to either:
¾ Click
Reset; the MP-1xx resets, utilizing the new cmp you loaded and utilizing the
current configuration files.
¾ Click
Cancel; the MP-1xx resets utilizing the cmp, ini and all other configuration files
that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.