User`s manual

MediaPack BRI Series
User's Manual 92 Document #: LTRT-83702
4. To define a sequence of tones and pauses, use the following command:
play <duration> <1st frequency> <level of 1st frequency> [<2nd
frequency> <level of 2nd frequency>
or the command:
no play
The following limitations apply:
• Frequency: 0 to 4,000 Hz
• Level: -31 to 3 dB
¾ To define a tone-set:
1. Log on to the system.
2. From the main configuration mode, change to the “tone-set” mode using the following
command:
profile tone-set <name>
Each call tone-set must have a unique name.
3. Use the command map call_progress_tone <call state> <call progress tone> for
each of the following states:
• dialtone
• alertingtone
• busytone
• queuedtone
Below is an example of the German Call Progress tone definition:
profile call-progress-tone Dialtone_D
play 1000 425 -14
profile call-progress-tone Alertingtone_D
play 250 425 -21
no play 4000
play 1000 425 -21
no play 4000
play 1000 425 -21
no play 4000
profile call-progress-tone Queuedtone_D
play 250 425 -21
no play 4000
play 1000 425 -21
no play 4000
play 1000 425 -21
no play 4000