User`s manual

MediaPack BRI Series
User's Manual 90 Document #: LTRT-83702
¾ To configure ISDN general settings:
1. Open the ‘ISDN General Settings' screen (Protocol Management menu > ISDN
submenu > ISDN General Settings option).
Figure 6-6: ISDN General Settings Screen
2. Configure the ISDN general parameters according Table 6-4.
3. Click the Submit button to apply your changes.
4. To save the changes to the flash memory, refer to Section 'Saving Configuration
Settings on the MediaPack' on page 146.
Table 6-4: ISDN General Parameters
Parameter Description
Clock Source
[clock-mode master]
Defines which port to use as clock source.
Valid options include:
 None = the system will use an internal clock
 0…3 = ISDN port 0 to 3, depending on model
Note: The selected clock must be configured as Uni-Side USER; otherwise the
system uses an internal clock.
Tone Set
[tone-set <name>]
Defines which tone set is used to generate call progress tones such as busy tone.
Valid options include the following:
 Default = built-in Tone Profile
 A = Austria
 D = Germany
 F = France
 I = Italy
 N = Norway
 P = Poland
 S = Sweden
 UK = England