User`s manual

User's Manual 6. Configuring the MediaPack
Version 2.2 87 July 2007
6.2.1.3 SIP Users
The SIP Users option opens the 'SIP Users' screen. This screen is used to define up to 32
SIP users, by name and password.
¾ To configure SIP users:
1. Open the ‘SIP Users' screen (Protocol Management menu > SIP Gateway submenu
> SIP Users option).
Figure 6-3: SIP Users Screen
2. Configure the SIP users according to Table 6-3.
3. Click the Submit button to apply your changes.
4. To save the changes to the flash memory, refer to Section 'Saving Configuration
Settings on the MediaPack' on page 146.
Table 6-3: SIP Users Parameters
Parameter Description
Name
User name used to register and authenticate with a registrar or to authenticate with a
proxy.
This user name is only used if the Authentication Mode parameter is set to Per User.