User`s manual

MediaPack BRI Series
User's Manual 80 Document #: LTRT-83702
6.2.1 SIP Gateway
The SIP Gateway submenu is used to configure the gateway’s specific SIP protocol
parameters.
This menu contains the following options:
 SIP General Settings (refer to Section 'SIP General ' on page 80)
 SIP Proxy & Registration Settings (refer to Section 'SIP Proxy & Registration ' on page
82)
 SIP Users (refer to Section 'SIP Users' on page 87)
6.2.1.1 SIP General Settings
The SIP General Settings option opens the 'SIP General Settings' screen. This screen is
used to configure the MediaPack's general SIP parameters.
¾ To configure the SIP general parameters:
1. Open the ‘SIP General Settings' screen (Protocol Management menu > SIP
Gateway submenu > SIP General Settings option).
Figure 6-1: SIP General Settings Screen
2. Configure the SIP general parameters according to Table 6-1.
3. Click the Submit button to save your changes.
4. To save the changes to the flash memory, refer to Section 'Saving Configuration
Settings on the MediaPack' on page 146.