User`s manual

User's Manual 4. Initial Configuration
Version 2.2 55 July 2007
¾ To configure the SIP parameters:
1. Access the 'SIP General Settings' screen (Protocol Management menu > SIP
Gateway submenu > SIP General Settings option).
Figure 4-10: SIP General Settings Screen
2. In the 'SIP General Settings' screen, configure the relevant parameters. (In our
example setup for Unit A, no configurations were required in this screen.)
3. Access the 'SIP Proxy & Registration' screen (Protocol Management menu > SIP
Gateway submenu > SIP Proxy & Registration Settings option).