User`s manual

MediaPack BRI Series
User's Manual 42 Document #: LTRT-83702
4.1.2.1 Assigning an IP Address Using HTTP
The procedure below describes how to configure the MediaPack's networking parameters
using the embedded Web server.
¾ To assign an IP address using HTTP:
1. Open a standard Web-browsing application such as Microsoft™ Internet Explorer™ or
Firefox.
2. In the browser's Uniform Resource Locator (URL) field, specify the IP address of the
MediaPack's LAN interface (i.e., http://192.168.2.1); the embedded Web server’s
Login screen appears, shown in the figure below:
Figure 4-3: Login Screen
3. In the ‘User name’ and ‘Password’ fields, enter the case-sensitive username (default:
‘Admin’) and password (default: ‘Admin’) respectively. (For changing the username
and password, refer to Section 'User Management' on page 140.)
4. Click the OK button; the Embedded Web Server is accessed, displaying the ‘Quick
Setup’ screen (shown in Figure 4-4).