User`s manual

User's Manual 2. MediaPack Physical Description
Version 2.2 23 July 2007
2 MediaPack Physical Description
This section provides detailed information on the hardware, the location and functionality of
the LEDs, buttons and connectors on the front and rear panels of the MediaPack gateway.
For detailed information on installing the MediaPack, refer to Chapter 3 on page 27.
2.1 Physical Description
2.1.1 Front Panel
The figure below displays the front panel of the MediaPack. For a description of the Reset
button, refer to 'Reset Button' on page 23; for a description of the front panel LEDs, refer to
'Front Panel LEDs' on page 24.
Figure 2-1: MediaPack Front Panel
2.1.1.1 Reset Button
The front panel of the MediaPack provides a reset button for resetting the gateway and
restoring the gateway's parameters to factory defaults (Refer to 'Resetting the MediaPack'
on page 154).
To reset the gateway, press the reset button with a paper clip or any other similar pointed
object. To reset the gateway to factory default settings, press the button continuously for
approximately 15 seconds.