User`s manual

MediaPack BRI Series
User's Manual 160 Document #: LTRT-83702
A.1.3 Using Point-to-Multipoint Connections, PBX Subscriber Interface
A Point-to-Multipoint connection between the PBX and the MediaPack is illustrated in the
network architecture diagram below (Figure A-3). The MediaPack is connected to the
PBX’s Subscriber interface. In other words, the PBX provides an ISDN Network and the
MediaPack is a User/Terminal device.
Figure A-3: Connecting to a PBX using Point-to- Multipoint Connection, PBX Subscriber
Interface
¾ To configure the MediaPack connection to the PBX:
1. Perform the initial configuration of the MediaPack’s IP interfaces and network settings
(refer to Section 'Connecting MediaPack's LAN Interface to your PC' on page 40).
2. Access the ‘ISDN Ports’ screen (Protocol Management menu > ISDN submenu >
ISDN Port Settings option).