User`s manual

User's Manual A. MediaPack Applications
Version 2.2 159 July 2007
Figure B 2: ISDN Ports Screen
3. From the 'ISDN Ports' list, select an ISDN port.
4. From the 'Uni-Side' drop-down list, select 'Net'.
5. From the 'Layer 2 Mode' drop-down list, select 'Point to Point'.
6. From the 'ISDN Interface' drop-down list, select the ISDN interface to which the
configured port binds.
7. Click Submit to apply your changes.
8. To save the changes to the flash memory, refer to Section 'Saving Configuration
Settings on the MediaPack' on page 146.
9. Return to the initial settings and continue from the ISDN Interfaces configuration (refer
to Section 'Configuring the ISDN Interfaces' on page 53).
Note: Regarding the ISDN interface configuration, in the example configuration
of the PBX connection (Point to Point, Net interface), the MSN
configuration is not applicable (for additional information on the MSN,
refer to Section 'MSN' on page 172.