User`s manual

User's Manual 6. Configuring the MediaPack
Version 2.2 151 July 2007
Table 6-28: Load CLI Parameters
Parameter Description
Using CLI
To load the configuration via CLI:
1. Open a CLI session using Telnet or a serial connection.
2. Log on to the system. Default username and password: user=”Admin”; password=”Admin”.
3. Type the enable command to acquire administrative privileges.
4. Change the mode to “configuration”.
5. Use the command copy <source> <target>. For example:
copy tftp://10.33.2.2/MediaPack.cfg startup-config