User`s manual

MediaPack BRI Series
User's Manual 150 Document #: LTRT-83702
6.6.3 Loading a Configuration File
You can load a configuration file, saved on your PC, to the MediaPack using TFTP.
¾ To load a configuration file to the MediaPack:
1. On the main menu bar, click the Load & Save Configuration menu; the ‘Load & Save
Configuration' screen is displayed.
Figure 6-36: Load & Save Configuration Screen
2. In the 'TFTP Server IP Address' field, enter the IP address of the TFTP server.
3. In the 'Configuration File Name' field, enter the file name and the path to the folder on
the TFTP server in which the configuration file is located.
4. Click the Load Configuration from TFTP button; the configuration file is loaded to the
MediaPack and stored in the MediaPack's non-volatile memory.
5. Reset the MediaPack (refer to Section to 'Resetting the MediaPack' on page 154).
Table 6-28: Load CLI Parameters
Parameter Description
<source>
Valid option includes:
“tftp://<ip>/<path>/<name>”: copy the configuration to a TFTP server
<target>
Valid option includes:
“startup-config”: currently saved configuration without network parameters