User`s manual

User's Manual 6. Configuring the MediaPack
Version 2.2 149 July 2007
Table 6-27: Save CLI Parameters
Parameter Description
<target>
Valid options include:
 “tftp://<ip>/<path>/<name>”: copy the configuration to a TFTP server
 “startup-config”: copy the configuration to the startup configuration
Using CLI
To save the configuration via CLI:
1. Open a CLI session using Telnet or a serial connection.
2. Log on to the system. Default username and password: user=”Admin”; password=”Admin”.
3. Type the enable command to acquire administrative privileges.
4. Change the mode to “configuration”.
5. Use the command copy <source> <target>. For example:
copy startup-config tftp://10.33.2.2/MediaPack.cfg