User`s manual

User's Manual 6. Configuring the MediaPack
Version 2.2 143 July 2007
 Boot Loader Version: Boot Loader Version
 Board Descriptor Version: Board Descriptor Version
 DSP Kernel Version: SW Version of the DSP Kernel
 DSP Program Version: SW Version of the DSP
 PCB Version: Version of the PCB
6.4.2 ISDN Ports Status
¾ To view the MediaPack's ISDN Port State:
 Open the 'System Information' screen (Status & Diagnostics menu > System
Information submenu > System Information option
The Screen shows the following information:
 Port: Port Number
 State: ISDN Port state: UP: Layer 1 is up or ISDN Layer 1 is down. Note this does not
indicate if a cable is plugged in or not
 Layer 2 Protocol: The ISDN Layer 2 protocol used on this port.
 Is Clock Source: Indicates if the port is configured as clock source
 Number of Slips: Number of slips on this link. The counter will be reset if the ISDN link
goes down.
 Is Syncronous: Indicates if the ISDN port is Synchronous to the Network. This is only
true if the port is configured as clock source.
To view the ISPN port status using the CLI, use the command: show isdn status