User`s manual

MediaPack BRI Series
User's Manual 142 Document #: LTRT-83702
6.4 Status & Diagnostics
You can view the MediaPack's general system information using the Status & Diagnostic
menu on the main menu bar.
6.4.1 System Information
¾ To view the MediaPack's system information, take the following
step:
 Open the 'System Information' screen (Status & Diagnostics menu > System
Information submenu > System Information option).
Figure 6-32: System Information Screen
To view the MediaPack's system information using the CLI, use the following command:
show version.
The following Information is displayed:
 Mac Address WAN: Ethernet MAC address of the WAN interface
 MAC Address LAN: Ethernet MAC address of the LAN interface
 Serial Number: Serial Number fo the System. This number should be visable on the
case
 Board Type: System type
 Flash Size [Bytes]: Flash Size in Bytes
 Ram Size [Bytes]: Ram Size in Bytes
 CPU Speed [MHz]: CPU Speed inMHz
 UpTime [HHH:MM:SS]: UpTime
 System Time: Time received by NTP and used in the logs
 Version ID: SW Version
 CPLD Version: CPLD Version