User`s manual

User's Manual 6. Configuring the MediaPack
Version 2.2 141 July 2007
5. In the Access group, define the access rights for the user by selecting one of the
following options:
• Read: the user can only view configuration settings, but cannot modify or delete
them.
• Read/Write: the user has full rights, i.e., can view, modify, and delete
configuration settings.
6. Click Submit to apply your settings.
Table 6-25: User Management CLI Parameters
Parameter Description
User Name
User name used to log in to the management system.
Password
Password required to log in to the management system
Access
Read-only or Read/Write access rights.
Using CLI
To define User Management parameters via CLI:
1. Log on to the system.
2. Change to the configuration mode.
3. To configure a read-only user, use the command:
operator <name> password <password>
4. To add a read / write user, use the command:
administrator <name> password <password>