User`s manual

MediaPack BRI Series
User's Manual 136 Document #: LTRT-83702
6.3.1.9 RIP
The RIP option is used to configure Routing Information Protocol (RIP) settings for LAN
and WAN interfaces.
¾ To configure the RIP parameters:
1. Open the ‘RIP Settings' screen (Advanced Configuration menu > Network Settings
> RIP option).
Figure 6-28: RIP Settings Screen
2. Configure the RIP settings.
3. Click the Submit button to save your changes.
4. To save the changes to the flash memory, refer to Section 'Saving Configuration
Settings on the MediaPack' on page 146.