Manualshelf

User`s manual

ManualsBrandsAudioCodes ManualsAcousticsMEDIAPACK VERSION 6.2
131132133134135136137138139140
User's Manual 6. Configuring the MediaPack
Version 2.2 131 July 2007
6.3.1.7 Access Control List
The Access Control List option allows you to add an Access Control List that can be used
for the following:
Block (Deny) inbound and outbound WAN traffic based on several match criteria
Assign a Class of Service (CoS) to allowed (Permit) packets
¾ To configure the Access Control List parameters:
1. Open the ‘Access Control List (ACL)' screen (Advanced Configuration menu >
Network Settings > Access Control List option).
Figure 6-25: Access Control List (ACL) Screen
2. Configure the ACL parameters according Table 6-22.
3. Click the Add button to add the rule. To activate the current list restart the WAN
interface by clicking the Apply button.
4. To save the changes to the flash memory, refer to Section 'Saving Configuration
Settings on the MediaPack' on page 146.