User`s manual

User's Manual 6. Configuring the MediaPack
Version 2.2 113 July 2007
6.2.4.2 ISDN Profiles
ISDN Profiles describe the properties of an IP-to-ISDN call. The ISDN Profiles option
opens the ‘ISDN Profile' screen. This screen is used to define Fax handling, DTM handling,
and codec groups.
¾ To configure the ISDN Profiles:
1. Open the ‘ISDN Profiles' screen (Protocol Management menu > Profile Definitions
submenu > ISDN Profiles option).
Figure 6-17: ISDN Profiles Screen
2. Configure the ISDN profile according to Table 6-15.
3. Click the Add button to apply the settings.
4. To save the changes to the flash memory, refer to Section 'Saving Configuration
Settings on the MediaPack' on page 146.
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.