User`s manual

MediaPack BRI Series
User's Manual 110 Document #: LTRT-83702
6.2.4 Profile Definitions
As described in 'Routing Tables' on page 106, the call routing assigns a profile to each call.
The profile defines specific properties used for this call. The system uses the following two
profiles:
 IP profiles for ISDN-to-SIP calls (refer to Section 'IP Profiles' on page 110)
 Tel profiles for SIP-to-ISDN calls (refer to Section 'ISDN Profiles' on page 113)
 Coder Groups (refer to Section 'Coder Group ' on page 115)
6.2.4.1 IP Profiles
IP Profiles describe the properties of an ISDN-to-IP call. The IP Profiles option opens the
‘IP Profiles' screen. This screen defines Fax handling, DTM handling, and codec groups.
¾ To configure the IP Profiles:
1. Open the ‘IP Profiles' screen (Protocol Management menu > Profile Definitions
submenu > IP Profiles option).
Figure 6-16: IP Profiles Screen