User`s manual

User's Manual Notices
Version 2.2 11 July 2007
Notice
This document describes the AudioCodes MediaPack MP-40x series BRI Voice-over-IP (VoIP)
gateways.
Information contained in this document is believed to be accurate and reliable at the time of printing.
However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee
accuracy of printed material after the Date Published nor can it accept responsibility for errors or
omissions. Updates to this document and other documents can be viewed by registered Technical
Support customers at www.audiocodes.com under Support / Product Documentation.
© Copyright 2007 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: Jul-19-2007 Date Printed: Jul-22-2007
Tip: When viewing this manual on CD, Web site or on any other electronic
copy, all cross-references are hyperlinked. Click on the page or section
numbers (shown in blue) to reach the individual cross-referenced item
directly. To return back to the point from where you accessed the cross-
reference, press the ALT and ◄ keys.
Trademarks
AudioCodes, AC, Ardito, AudioCoded, NetCoder, TrunkPack, VoicePacketizer, MediaPack,
Stretto, Mediant, VoIPerfect and IPmedia, OSN, Open Solutions Network, What's Inside
Matters, Your Gateway To VoIP, 3GX and Nuera, Netrake, InTouch, CTI², and CTI
Squared are trademarks or registered trademarks of AudioCodes Limited. All other
products or trademarks are property of their respective owners.
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed
of with unsorted waste. Please contact your local recycling authority for disposal of this
product.
Customer Support
Customer technical support and service are provided by AudioCodes’ Distributors,
Partners, and Resellers from whom the product was purchased. For Customer support for
products purchased directly from AudioCodes, contact [e-mail]
.
Abbreviations and Terminology
Each abbreviation, unless widely used, is spelled out in full when first used, and only
Industry standard terms are used throughout this manual. The symbol 0x indicates
hexadecimal notation.