User`s manual

User's Manual 6. Configuring the MediaPack
Version 2.2 109 July 2007
Table 6-13: IP to Tel Routing Table Parameters
Parameter Description
Position
Determines the priority of the configured routing rule, where "0" has the highest
priority.
Destination Number
[dest-num-match <num>]
Match the destination number [prefix, suffix, number].
Source Number
[src-num-match <num>]
Match the source number [prefix, suffix, number].
Source IP Address
[src-ip-match <IP>]
Match the source IP of the invite.
Destination interface
[dest-if <isdn if number>]
Destination ISDN interface.
Profile ID
[[profile-id <id>]]
Determines the profile to be used.
Using CLI
To define the IP -> Tel routing parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “routing ip2tel table” mode.
3. Enter a routing entry using the command:
pos <num> <values>
4. To remove a routing entry, use the command:
no pos <num>
For a detailed explanation of the supplied matching and manipulation criteria, use the online help.
Note: <num> denotes the dialing plan notation (refer to Section 'Dialing Notations' on page 67).