Installation manual

Installation Manual 32 Document #: LTRT-59813
MediaPack Series
2.2.4.5 Connecting MP-124 to Power
MP-124 can be powered either from a standard AC electrical outlet or a 48-VDC power
supply. The power configuration depends on the ordered MP-124 model.
2.2.4.5.1 AC Power Supply
This section describes cabling of the MP-124 model for AC power.
Warnings:
• The device must be connected only by professional service personnel.
• Ensure that the device connects to an electrical socket outlet that
provides protective earthing (grounding). Prior to connecting power, refer
to the Regulatory Information document supplied with the device.
• Use only the AC power cord supplied with the device.
¾ To connect MP-124 to the AC power supply:
 Connect the MP-124 AC power socket (located on the rear panel) to a standard
electrical wall outlet, using the supplied AC power cord.