User`s manual

MediaPack SIP User’s Manual 9. Networking Capabilities
Version 4.6 199 June 2005
Note: Configure the OAM parameters only if the OAM networking parameters are
different from the networking parameters used in the Single IP Network
mode.
Figure 9-3: Example of the IP Settings Screen
¾ Click the Submit button to save your changes.
5. Configure the IP Routing table by completing the following steps (the IP Routing table is
required to define static routing rules for the OAM and Control networks since a default
gateway isn’t supported for these networks):
¾ Open the ‘IP Routing Table’ screen (Advanced Configuration menu > Network
Settings > IP Routing Table option); the ‘IP Routing Table’ screen is displayed.
Figure
9-4: Example of the IP Routing Table Screen
¾ Use the ‘Add a new table entry’ pane to add the routing rules shown in Table 9-3 below.
Table
9-3: Example of IP Routing Table Configuration
Destination IP
Address
Destination Mask
Gateway IP
Address
Hop Count Network Type
130.33.4.6 255.255.255.255 10.32.0.1 20 Control
83.4.87.6 255.255.255.0 10.31.0.1 20 OAM