User`s manual

MediaPack SIP User’s Manual 8. Telephony Capabilities
Version 4.6 191 June 2005
8.11.4.4 FXO MediaPack Configuration (using the Embedded Web Server)
¾ To configure the FXO MediaPack, take these 4 steps:
1. In the ‘Endpoint Phone Numbers’ screen, assign the phone numbers 200 to 207 for the
gateway’s endpoints.
2. In the ‘Automatic Dialing’ screen, enter the phone numbers of the FXS MediaPack gateway
in the ‘Destination Phone Number’ fields. When a ringing signal is detected at port #1, the
FXO gateway automatically dials the number ‘100’.
3. In the ‘Tel to IP Routing’ screen, enter 10 in the ‘Destination Phone Prefix’ field, and the IP
address of the FXS MediaPack gateway (10.1.10.3) in the field ‘IP Address’.
4. In the ‘Protocol Management’ screen, set the parameter ‘
Dialing Mode’ to ‘Two Stage’
(IsTwoStageDial=1).