User`s manual

MediaPack SIP User’s Manual 5. Configuring the MediaPack
Version 4.6 161 June 2005
5.9 Save Configuration
The Save Configuration screen enables users to save the current parameter configuration and
the loaded auxiliary files to the non-volatile memory so they are available after a power fail.
Parameters that are only saved to the volatile memory revert to their previous settings after
hardware reset.
Note that when performing a software reset (i.e., via Web or SNMP) you can choose to save the
changes to the non-volatile memory. Therefore, there is no need to use the Save Configuration
screen.
Note: Saving changes to the non-volatile memory may disrupt traffic on the gateway.
To avoid this, disable all traffic before saving.
¾ To save the changes to the non-volatile, take these 2 steps:
1. Click the Save Configuration button on the main menu bar; the ‘Save Configuration’ screen
is displayed.
Figure
5-58: Save Configuration Screen
2. Click the Save Configuration button in the middle of the screen; a confirmation message
appears when the save is complete.