User`s manual

MediaPack SIP
MediaPack SIP User’s Manual 150 Document #: LTRT-65405
Table 5-46: Call Counters Description (continues on pages 149 to 150)
Counter Description
Number of Failed Calls
due to No Matched
Capabilities
This counter indicates the number of calls that failed due to mismatched gateway
capabilities. It is incremented as a result of an internal identification of capability
mismatch. This mismatch is reflected to CDR via the value of the parameter
‘DefaultReleaseReason’ (default is GWAPP_NO_ROUTE_TO_DESTINATION (3)),
or by the GWAPP_SERVICE_NOT_IMPLEMENTED_UNSPECIFIED(79) reason.
Number of Failed Calls
due to Other Failures
This counter is incremented as a result of calls that fail due to reasons not covered
by the other counters.
Percentage of
Successful Calls
The percentage of established calls from attempted calls.
Average Call Duration
[sec]
The average call duration of established calls.
Attempted Fax Calls
Counter
This counter indicates the number of attempted fax calls.
Successful Fax Calls
Counter
This counter indicates the number of successful fax calls.
5.7.1.3 Call Routing Status
The Call Routing Status screen provides you with information on the current routing method used
by the gateway. This information includes the IP address and FQDN (if used) of the Proxy server
the gateway currently operates with.
Figure
5-45: Call Routing Status Screen
Table
5-47: Call Routing Status Parameters
Parameter Description
Proxy = Proxy server is used to route calls.
Routing Table preferred to Proxy = The Tel to IP Routing table takes
precedence over a Proxy for routing calls (PreferRouteTable = 1).
Current Call-Routing Method
Routing Table = The Tel to IP Routing table is used to route calls.
Not Used = Proxy server isn’t defined.
Current Proxy
IP address and FQDN (if exists) of the Proxy server the gateway currently
operates with.
N/A = Proxy server isn’t defined.
OK = Communication with the Proxy server is in order.
Current Proxy State
Fail = No response from any of the defined Proxies.