User`s manual

MediaPack SIP User’s Manual 5. Configuring the MediaPack
Version 4.6 131 June 2005
Table 5-37: Board, ini File Parameters (continues on pages 128 to 131)
ini File Parameter Name Valid Range and Description
BootPDelay
The interval between the device’s startup and the first BootP/DHCP request
that is issued by the device.
1 = 1 second (default).
2 = 3 second.
3 = 6 second.
4 = 30 second.
5 = 60 second.
Note: This parameter only takes effect from the next reset of the device.
ExtBootPReqEnable
0 = Disable (default).
1 = Enable extended information to be sent in BootP request.
If enabled, the device uses the vendor specific information field in the BootP
request to provide device-related initial startup information such as board type,
current IP address, software version, etc. For a full list of the vendor specific
Information fields, refer to Section
7.3.2 on page 167.
The BootP
/
TFTP configuration utility displays this information in the ‘Client Info’
column (refer to Figure B-1).
Note: This option is not available on DHCP servers.