Installation guide

MP-11x
MP-11x 26 Document #: LTRT-61504
6 Monitoring the MP-11x
The MP-11x provides several ways of monitoring the status of the gateway:
• Monitoring the MP-11x front panel LEDs (refer to Section
6.1 below).
• Monitoring the MP-11x channels via the Embedded Web Server (refer to Section
6.2 on page
27).
6.1 Monitoring the MP-11x Front Panel LEDs
The MP-11x front panel LEDs indicate the Ethernet LAN status, Data (RTP) activity and state of
the gateway ports. Table
6-1 describes the meaning of each state of the LEDs on the front panel.
Table
6-1: Definition of MP-11x Front Panel LED Indicators
LED Type Color State Definition
On Device powered, self-test OK
Ready
Device
Status
Green
Off Software loading or System failure
On Valid 10/100 Base-TX Ethernet connection
Uplink
Ethernet
Link Status
Green
Off No uplink
On Power is currently being supplied to the device
Power
Power Supply
Status
Green
Off
Either there’s a failure / disruption in the AC power
supply or power is currently not being supplied to the
device through the AC power supply entry.
On
Failure (fatal error).
Or system initialization.
Fail
Failure
Indication
Red
Off Normal working condition
Blinking The phone is ringing (incoming call, before answering).
Fast
Blinking
Line malfunction
Off Normal onhook position
Channels
Status
Telephone
Interface
Green
On Offhook