User`s manual

SIP User's Manual 5. Web Management
Version 5.0 99 October 2006
Figure 5-29: Web User Accounts Screen (for Users with ‘Security Administrator’ Privileges)
2. To change the access level of the secondary account (the access level of the primary
account cannot be changed), in the ‘Access Level’ drop-down list, select the new
access level and click the button Change Access Level; the new access level is
applied immediately.
3. To change the username of an account, enter the new username in the field ‘User
Name’ and click the button Change User Name; the new username is applied
immediately and the ‘Enter Network Password’ screen appears (shown in Figure 5-1
on page 58). Enter the updated username in the ‘Enter Network Password’ screen.
Note that the username can be a maximum of 19 case-sensitive characters.
4. To change the password of an account, enter the current password in the field
‘Current Password’, the new password in the fields ‘New Password’ and ‘Confirm New
Password’ and click the button Change Password; the new password is applied
immediately and the ‘Enter Network Password’ screen appears (shown in Figure 5-1
on page 58). Enter the updated password in the ‘Enter Network Password’ screen.
Note that the password can be a maximum of 19 case-sensitive characters.
Note: A user with a ‘Security Administrator’ access level can change all attributes
for all accounts. Users with an access level other than ‘Security
Administrator’ can only change their own password and username.