User`s manual

SIP User's Manual 5. Web Management
Version 5.0 97 October 2006
5.6.7 Regional Settings
The ‘Regional Settings’ screen enables you to set and view the gateway’s internal date and
time and to load to the gateway the following configuration files: Call Progress Tones, CAS
and Voice Prompts. For detailed information on the configuration files, refer to Section
16
on page 329.
¾ To configure the date and time of the gateway, take these 3 steps:
1. Open the ‘Regional Settings’ screen (Advanced Configuration menu > Regional
Settings); the ‘Regional Settings' screen is displayed.
Figure 5-28: Regional Settings Screen
2. Enter the time and date where the gateway is installed.
3. Click the Set Date & Time button; the date and time are automatically updated.
Note: After performing a hardware reset, the date and time are returned to their
defaults and should be updated.
¾ To load a configuration file to the VoIP gateway, take these 8
steps:
1. Open the ‘Regional Settings’ screen (Advanced Configuration menu > Regional
Settings); the ‘Regional Settings’ screen is displayed (shown in Figure 5-28).
2. Click the Browse button adjacent to the file you want to load.
3. Navigate to the folder that contains the file you want to load.
4. Click the file and click the Open button; the name and path of the file appear in the
field beside the Browse button.
5. Click the Send File button that is next to the field that contains the name of the file you
want to load. An exclamation mark in the screen section indicates that the file’s
loading doesn’t take effect on-the-fly (e.g., CPT file).
6. Repeat steps 2 to 5 for each file you want to load.