User`s manual

Mediant 2000 & TP-1610 & TP-260
SIP User's Manual 96 Document #: LTRT-68805
5.6.6 Restoring and Backing up the Gateway Configuration
The Configuration File screen enables you to restore (load a new ini file to the gateway) or
to back up (make a copy of the VoIP gateway ini file and store it in a directory on your
computer) the current configuration the gateway is using.
Back up your configuration if you want to protect your VoIP gateway programming. The
backup ini file includes only those parameters that were modified and contain other than
default values.
Restore your configuration if the VoIP gateway has been replaced or has lost its
programming information, you can restore the VoIP gateway configuration from a previous
backup or from a newly created ini file. To restore the VoIP gateway configuration from a
previous backup you must have a backup of the VoIP gateway information stored on your
computer.
¾ To restore or back up the ini file:
 Open the ‘Configuration File’ screen (Advanced Configuration menu >
Configuration File); the ‘Configuration File’ screen is displayed.
Figure 5-27: Configuration File Screen
¾ To back up the ini file, take these 4 steps:
1. Click the Get ini File button; the ‘File Download’ window opens.
2. Click the Save button; the ‘Save As’ window opens.
3. Navigate to the folder where you want to save the ini file.
4. Click the Save button; the VoIP gateway copies the ini file into the folder you selected.
¾ To restore the ini file, take these 4 steps:
1. Click the Browse button.
2. Navigate to the folder that contains the ini file you want to load.
3. Click the file and click the Open button; the name and path of the file appear in the
field beside the Browse button.
4. Click the Send ini File button, and click OK in the prompt; the gateway is
automatically reset (from the cmp version stored on the flash memory).