User`s manual

Mediant 2000 & TP-1610 & TP-260
SIP User's Manual 66 Document #: LTRT-68805
Table 5-3: Number Manipulation Parameters (continues on pages 65 to 66)
Parameter Description
The manipulation rules are applied to any incoming call whose:
• Destination number prefix matches the prefix defined in the ‘Destination Number’ field.
• Source number prefix matches the prefix defined in the ‘Source Prefix’ field.
• Source IP address matches the IP address defined in the ‘Source IP’ field (if applicable).
Note that number manipulation can be performed using a combination of each of the above criteria, or using
each criterion independently.
Note: For available notations that represent multiple numbers, refer to Section
5.5.3.1 on page 67.
Num of stripped digits
• Enter the number of digits that you want to remove from the left of the
telephone number prefix. For example, if you enter 3 and the phone number
is 5551234, the new phone number is 1234.
• Enter the number of digits (in brackets) that you want to remove from the
right of the telephone number prefix.
Note: A combination of the two options is allowed (e.g., 2(3)).
Prefix / Suffix to add
• Prefix - Enter the number / string you want to add to the front of the phone
number. For example, if you enter 9 and the phone number is 1234, the new
number is 91234.
• Suffix - Enter the number / string (in brackets) you want to add to the end of
the phone number. For example, if you enter (00) and the phone number is
1234, the new number is 123400.
Note: You can enter a prefix and a suffix in the same field (e.g., 9(00)).
Number of digits to leave Enter the number of digits that you want to leave from the right.
Note: The manipulation rules are executed in the following order:
1. Num of stripped digits
2. Number of digits to leave
3. Prefix / suffix to add
Figure 5-6 on the previous page exemplifies the use of these manipulation rules in the ‘Source Phone Number
Manipulation Table for TelÆIP Calls’:
• When destination number equals 035000 and source number equals 20155, the source number is changed
to 97220155.
• When source number equals 1001876, it is changed to 587623.
• Source number 1234510012001 is changed to 20018.
• Source number 3122 is changed to 2312.
NPI Select the Number Plan assigned to this entry.
You can select Unknown [0], Private [9] or E.164 Public [1].
The default is Unknown.
For a detailed list of the available NPI/TON values, refer to Section
5.5.3.2 on
page 67.
TON Select the Number Type assigned to this entry.
• If you selected Unknown as the Number Plan, you can select Unknown [0].
• If you selected Private as the Number Plan, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PISN Specific [3] or Level 0
Regional (Local) [4].
• If you selected E.164 Public as the Number Plan, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber [4] or
Abbreviated [6].
The default is Unknown.
Presentation Select ‘Allowed’ to send Caller ID information when a call is made using these
destination / source prefixes.
Select ‘Restricted’ if you want to restrict Caller ID information for these prefixes.