User`s manual
Table Of Contents
- Mediant 2000 & TP-1610 & TP-260/UNI SIP User’s Manual Version 5.0
- Table of Contents
- List of Figures
- List of Tables
- Notices
- 1. Overview
- 2. Physical Description
- 3. Installation
- 4. Getting Started
- 5. Web Management
- Computer Requirements
- Protection and Security Mechanisms
- Accessing the Embedded Web Server
- Getting Acquainted with the Web Interface
- Protocol Management
- Advanced Configuration
- Status & Diagnostic
- Software Update Menu
- Maintenance
- Logging Off the Embedded Web Server
- 6. Gateway's ini File Configuration
- Secured ini File
- Modifying an ini File
- The ini File Content
- The ini File Structure
- The ini File Example
- Networking Parameters
- System Parameters
- Web and Telnet Parameters
- Security Parameters
- RADIUS Parameters
- SNMP Parameters
- SIP Configuration Parameters
- Voice Mail Parameters
- ISDN and CAS Interworking-Related Parameters
- Number Manipulation and Routing Parameters
- E1/T1 Configuration Parameters
- Channel Parameters
- Configuration Files Parameters
- 7. Using BootP / DHCP
- 8. Telephony Capabilities
- Working with Supplementary Services
- Configuring the DTMF Transport Types
- Fax & Modem Transport Modes
- Event Notification using X-Detect Header
- ThroughPacket™
- Dynamic Jitter Buffer Operation
- Configuring the Gateway’s Alternative Routing (based on Conn
- Call Detail Report
- Supported RADIUS Attributes
- Trunk to Trunk Routing Example
- Proxy or Registrar Registration Example
- SIP Call Flow Example
- SIP Authentication Example
- 9. Networking Capabilities
- 10. Advanced PSTN Configuration
- 11. Advanced System Capabilities
- 12. Special Applications
- 13. Security
- 14. Diagnostics
- 15. SNMP-Based Management
- SNMP Standards and Objects
- Carrier Grade Alarm System
- Cold Start Trap
- Third-Party Performance Monitoring Measurements
- TrunkPack-VoP Series Supported MIBs
- Traps
- SNMP Interface Details
- SNMP Manager Backward Compatibility
- Dual Module Interface
- SNMP NAT Traversal
- SNMP Administrative State Control
- AudioCodes’ Element Management System
- 16. Configuration Files
- Appendix A. Selected Technical Specifications
- Appendix B. Supplied SIP Software Kit
- Appendix C. SIP Compliance Tables
- Appendix D. The BootP/TFTP Configuration Utility
- Appendix E. RTP/RTCP Payload Types and Port Allocation
- Appendix F. RTP Control Protocol Extended Reports (RTCP-XR)
- Appendix G. Accessory Programs and Tools
- Appendix H. Release Reason Mapping
- Appendix I. SNMP Traps
- Appendix J. Installation and Configuration of Apache HTTP Server
- Appendix K. Regulatory Information

Mediant 2000 & TP-1610 & TP-260
SIP User's Manual 6 Document #: LTRT-68805
9.3 NAT Support ........................................................................................................230
9.3.1 STUN .................................................................................................................... 231
9.3.2 First Incoming Packet Mechanism........................................................................ 232
9.3.3 No-Op Packets ..................................................................................................... 232
9.4 Point-to-Point Protocol over Ethernet (PPPoE)....................................................233
9.4.1 Point-to-Point Protocol (PPP) Overview ............................................................... 233
9.4.2 PPPoE Overview .................................................................................................. 234
9.4.3 PPPoE in AudioCodes Gateways......................................................................... 234
9.5 IP Multicasting......................................................................................................235
9.6 Robust Reception of RTP Streams......................................................................235
9.7 Multiple Routers Support......................................................................................235
9.8 Simple Network Time Protocol Support ...............................................................236
9.9 IP QoS via Differentiated Services (DiffServ).......................................................236
9.10 VLANS and Multiple IPs.......................................................................................237
9.10.1 Multiple IPs ........................................................................................................... 237
9.10.2 IEEE 802.1p/Q (VLANs and Priority).................................................................... 237
9.10.3 Getting Started with VLANS and Multiple IPs ...................................................... 239
10 Advanced PSTN Configuration......................................................................243
10.1 Gateway Clock Settings.......................................................................................243
10.2 ISDN Overlap Dialing...........................................................................................243
10.3 Using ISDN NFAS................................................................................................244
10.3.1 NFAS Interface ID................................................................................................. 245
10.3.2 Working with DMS-100 Switches ......................................................................... 245
10.4 Redirect Number and Calling Name (Display) .....................................................246
11 Advanced System Capabilities ......................................................................247
11.1 Restoring Networking Parameters to their Initial State ........................................247
11.2 Establishing a Serial Communications Link with the Mediant 2000.....................248
11.3 Automatic Update Mechanism .............................................................................249
11.4 Startup Process....................................................................................................251
11.5 Using Parameter Tables ......................................................................................253
11.5.1 Table Indices ........................................................................................................ 253
11.5.2 Table Permissions ................................................................................................ 254
11.5.3 Dynamic Tables vs. Static Tables ........................................................................ 254
11.5.4 Secret Tables........................................................................................................ 254
11.5.5 Using the ini File to Configure Parameter Tables................................................. 255
11.6 Customizing the Web Interface............................................................................257
11.6.1 Replacing the Main Corporate Logo..................................................................... 257
11.6.2 Replacing the Background Image File.................................................................. 259
11.6.3 Customizing the Product Name............................................................................ 260
11.6.4 Modifying ini File Parameters via the Web AdminPage ....................................... 261
11.7 Software Upgrade Key.........................................................................................262
11.7.1 Backing up the Current Software Upgrade Key ................................................... 262
11.7.2 Loading the Software Upgrade Key...................................................................... 262
11.7.3 Verifying that the Key was Successfully Loaded.................................................. 264
11.7.4 Troubleshooting an Unsuccessful Loading of a Key ............................................ 264
11.7.5 Abort Procedure.................................................................................................... 265