User`s manual

Mediant 2000 & TP-1610 & TP-260
SIP User's Manual 58 Document #: LTRT-68805
5.3 Accessing the Embedded Web Server
¾ To access the Embedded Web Server, take these 4 steps:
1. Open a standard Web-browsing application such as Microsoft™ Internet Explorer™ or
Netscape™ Navigator™.
2. In the Uniform Resource Locator (URL) field, specify the IP address of the gateway
(e.g., http://10.1.10.10); the Embedded Web Server’s ‘Enter Network Password’
screen appears, shown in Figure 5-1.
Figure 5-1: Embedded Web Server Login Screen
3. In the ‘User Name’ and ‘Password’ fields, enter the username (default: ‘Admin’) and
password (default: ‘Admin’). Note that the username and password are case-sensitive.
4. Click the OK button; the ‘Quick Setup’ screen is accessed (shown in Figure 4-1).
5.3.1 Using Internet Explorer to Access the Embedded Web Server
Internet explorer’s security settings may block access to the gateway’s Web browser if
they’re configured incorrectly. In this case, the following message is displayed:
Unauthorized
Correct authorization is required for this area. Either your browser does not
perform authorization or your authorization has failed. RomPager server.
¾ To troubleshoot blocked access to Internet Explorer, take these 3
steps:
1. Delete all cookies from the Temporary Internet files. If this does not clear up the
problem, the security settings may need to be altered (continue with Step 2).
2. In Internet Explorer, Tools, Internet Options:
• Select the Security tab, select Custom Level. Scroll down until the Logon options
are displayed and change the setting to: Prompt for username and password.
• Select the Advanced tab, scroll down until the HTTP 1.1 Settings are displayed
and verify that the Use HTTP 1.1 option is checked.
3. Restart the browser.