User`s manual
Table Of Contents
- Mediant 2000 & TP-1610 & TP-260/UNI SIP User’s Manual Version 5.0
- Table of Contents
- List of Figures
- List of Tables
- Notices
- 1. Overview
- 2. Physical Description
- 3. Installation
- 4. Getting Started
- 5. Web Management
- Computer Requirements
- Protection and Security Mechanisms
- Accessing the Embedded Web Server
- Getting Acquainted with the Web Interface
- Protocol Management
- Advanced Configuration
- Status & Diagnostic
- Software Update Menu
- Maintenance
- Logging Off the Embedded Web Server
- 6. Gateway's ini File Configuration
- Secured ini File
- Modifying an ini File
- The ini File Content
- The ini File Structure
- The ini File Example
- Networking Parameters
- System Parameters
- Web and Telnet Parameters
- Security Parameters
- RADIUS Parameters
- SNMP Parameters
- SIP Configuration Parameters
- Voice Mail Parameters
- ISDN and CAS Interworking-Related Parameters
- Number Manipulation and Routing Parameters
- E1/T1 Configuration Parameters
- Channel Parameters
- Configuration Files Parameters
- 7. Using BootP / DHCP
- 8. Telephony Capabilities
- Working with Supplementary Services
- Configuring the DTMF Transport Types
- Fax & Modem Transport Modes
- Event Notification using X-Detect Header
- ThroughPacket™
- Dynamic Jitter Buffer Operation
- Configuring the Gateway’s Alternative Routing (based on Conn
- Call Detail Report
- Supported RADIUS Attributes
- Trunk to Trunk Routing Example
- Proxy or Registrar Registration Example
- SIP Call Flow Example
- SIP Authentication Example
- 9. Networking Capabilities
- 10. Advanced PSTN Configuration
- 11. Advanced System Capabilities
- 12. Special Applications
- 13. Security
- 14. Diagnostics
- 15. SNMP-Based Management
- SNMP Standards and Objects
- Carrier Grade Alarm System
- Cold Start Trap
- Third-Party Performance Monitoring Measurements
- TrunkPack-VoP Series Supported MIBs
- Traps
- SNMP Interface Details
- SNMP Manager Backward Compatibility
- Dual Module Interface
- SNMP NAT Traversal
- SNMP Administrative State Control
- AudioCodes’ Element Management System
- 16. Configuration Files
- Appendix A. Selected Technical Specifications
- Appendix B. Supplied SIP Software Kit
- Appendix C. SIP Compliance Tables
- Appendix D. The BootP/TFTP Configuration Utility
- Appendix E. RTP/RTCP Payload Types and Port Allocation
- Appendix F. RTP Control Protocol Extended Reports (RTCP-XR)
- Appendix G. Accessory Programs and Tools
- Appendix H. Release Reason Mapping
- Appendix I. SNMP Traps
- Appendix J. Installation and Configuration of Apache HTTP Server
- Appendix K. Regulatory Information
SIP User's Manual B. Supplied SIP Software Kit
Version 5.0 343 October 2006
B Supplied SIP Software Kit
Table B-1 describes the standard supplied software kit for the Mediant 2000, TP-1610 and
TP-260 SIP gateways. The supplied documentation includes this User’s Manual, the
Mediant 2000 Fast Track Guide and the Mediant 3000 & Mediant 2000 & TP Series SIP
Digital Release Notes.
Table B-1: Supplied Software Kit
File Name Description
Ram.cmp file
Mediant_SIP_xxx.cmp
Image file containing the software for the Mediant 2000 and TP-1610
gateways.
TP260_UN_SIP_xxx.cmp
Image file containing the software for the TP-260 gateway.
ini files and utilities
Mediant_SIP_T1.ini
Sample ini file for Mediant 2000 / TP-1610 E1 gateways.
Mediant_SIP_E1.ini
Sample ini file for Mediant 2000 / TP-1610 T1 gateways.
TP260_SIP_T1.ini
Sample ini file for TP-260 E1 gateways.
TP260_SIP_E1.ini
Sample ini file for TP-260 T1 gateways.
Usa_tones_xx.dat
Default loadable Call Progress Tones dat file.
Usa_tones_xx.ini
Call progress Tones ini file (used to create dat file).
voice_prompts.dat
Default loadable Voice Prompts dat file.
DConvert.exe
TrunkPack Downloadable Conversion Utility
ACSyslog08.exe Syslog server.
bootp.exe BootP/TFTP configuration utility
260_UNSeries.inf A PCI driver for the TP-260 that is used to prevent the Found new Hardware
Wizard to reappear each time the host PC restarts.
CAS Protocol Files
Used for various signaling types, such as E_M_WinkTable.dat.
MIB Files
MIB library for SNMP browser
CAS Capture Tool
Utility that is used to convert CAS traces to textual form.
ISDN Capture Tool
Utility that is used to convert ISDN traces to textual form.