User`s manual
Table Of Contents
- Mediant 2000 & TP-1610 & TP-260/UNI SIP User’s Manual Version 5.0
- Table of Contents
- List of Figures
- List of Tables
- Notices
- 1. Overview
- 2. Physical Description
- 3. Installation
- 4. Getting Started
- 5. Web Management
- Computer Requirements
- Protection and Security Mechanisms
- Accessing the Embedded Web Server
- Getting Acquainted with the Web Interface
- Protocol Management
- Advanced Configuration
- Status & Diagnostic
- Software Update Menu
- Maintenance
- Logging Off the Embedded Web Server
- 6. Gateway's ini File Configuration
- Secured ini File
- Modifying an ini File
- The ini File Content
- The ini File Structure
- The ini File Example
- Networking Parameters
- System Parameters
- Web and Telnet Parameters
- Security Parameters
- RADIUS Parameters
- SNMP Parameters
- SIP Configuration Parameters
- Voice Mail Parameters
- ISDN and CAS Interworking-Related Parameters
- Number Manipulation and Routing Parameters
- E1/T1 Configuration Parameters
- Channel Parameters
- Configuration Files Parameters
- 7. Using BootP / DHCP
- 8. Telephony Capabilities
- Working with Supplementary Services
- Configuring the DTMF Transport Types
- Fax & Modem Transport Modes
- Event Notification using X-Detect Header
- ThroughPacket™
- Dynamic Jitter Buffer Operation
- Configuring the Gateway’s Alternative Routing (based on Conn
- Call Detail Report
- Supported RADIUS Attributes
- Trunk to Trunk Routing Example
- Proxy or Registrar Registration Example
- SIP Call Flow Example
- SIP Authentication Example
- 9. Networking Capabilities
- 10. Advanced PSTN Configuration
- 11. Advanced System Capabilities
- 12. Special Applications
- 13. Security
- 14. Diagnostics
- 15. SNMP-Based Management
- SNMP Standards and Objects
- Carrier Grade Alarm System
- Cold Start Trap
- Third-Party Performance Monitoring Measurements
- TrunkPack-VoP Series Supported MIBs
- Traps
- SNMP Interface Details
- SNMP Manager Backward Compatibility
- Dual Module Interface
- SNMP NAT Traversal
- SNMP Administrative State Control
- AudioCodes’ Element Management System
- 16. Configuration Files
- Appendix A. Selected Technical Specifications
- Appendix B. Supplied SIP Software Kit
- Appendix C. SIP Compliance Tables
- Appendix D. The BootP/TFTP Configuration Utility
- Appendix E. RTP/RTCP Payload Types and Port Allocation
- Appendix F. RTP Control Protocol Extended Reports (RTCP-XR)
- Appendix G. Accessory Programs and Tools
- Appendix H. Release Reason Mapping
- Appendix I. SNMP Traps
- Appendix J. Installation and Configuration of Apache HTTP Server
- Appendix K. Regulatory Information
SIP User's Manual A. Selected Technical Specifications
Version 5.0 339 October 2006
A.3 TP-1610 Specifications
Table A-3: TP-1610 Selected Technical Specifications (continues on pages 339 to 340)
Function Specification
Trunk & Channel Capacity
4
Capacity with E1
1, 2, 4, 8 or 16 E1 spans, 30, 60, 120, 240 or 480 digital channels
30 Channels on 1 E1 span with gateway-1 only
60 Channels on 2 E1 spans with gateway-1 only
120 Channels on 4 E1 spans with gateway-1 only
240 Channels on 8 E1 spans with gateway-1 only
480 Channels on 16 E1 spans with gateway-1 and gateway-2
Capacity with T1
1, 2, 4, 8 or 16 T1 spans, 24, 48, 96, 192 or 384 digital channels
24 Channels on 1 T1 span with gateway-1 only
48 Channels on 2 T1 spans with gateway-1 only
96 Channels on 4 T1 spans with gateway-1 only
192 Channels on 8 T1 spans with gateway-1 only
384 Channels on 16 T1 spans with gateway-1 and gateway-2
Processor
Control Processor
Motorola PowerQUICC 8260
Control Processor Memory
SDRAM 64* - 128 MB (*on 60-channel models)
Signal Processors
AudioCodes AC486 VoIP DSP based on:
TI DSP TMS5541 – each core at 133 MHz
Interfaces
Telephony Interface
1, 2, 4, 8 or 16 E1/T1/J1 Balanced 120/100 ohm, or 75 ohm using a BNC to RJ-
45 dual E1/T1 G.703 Balun adapter
5
.
Network Interface
Two 10/100 Base-TX, half or full duplex with auto-negotiation
RS-232 Interface
RS-232 Terminal Interface. DB-9 connector on rear panel (available only on the
1, 2 and 4-span configuration).
PCI Bus
33 MHz, 32 bit, slave mode (PICMG 2.0 revision 2.1)
LED Indicators
LED Indications on Front
Panel
Power, ACT/Fail, T1/E1 status, LAN status, Swap ready indication
Connectors & Switches
Rear Panel
Trunks
1 to 8 and 9 to 16
Two 50-pin female Telco connectors (DDK57AE-40500-21D) or 8 RJ-48c
connectors for trunks 1 to 8 only
Ethernet 1 and 2
Two 10/100 Base-TX, RJ-45 shielded connectors
RS-232
Console port - DB-9
Physical
Physical
6U single cPCI slot. PICMG 2.0, R2.1 and R2.16 and R.3.0 CompactPCI™ card
4
TP-1610 channel capacity depends on configuration settings.
5
The following Balun adaptors were tested and certified by AudioCodes:
Manufacture Name: AC&E Part Number: B04040072
Manufacture Name: RIT Part Number: R3712271