User`s manual
Table Of Contents
- Mediant 2000 & TP-1610 & TP-260/UNI SIP User’s Manual Version 5.0
- Table of Contents
- List of Figures
- List of Tables
- Notices
- 1. Overview
- 2. Physical Description
- 3. Installation
- 4. Getting Started
- 5. Web Management
- Computer Requirements
- Protection and Security Mechanisms
- Accessing the Embedded Web Server
- Getting Acquainted with the Web Interface
- Protocol Management
- Advanced Configuration
- Status & Diagnostic
- Software Update Menu
- Maintenance
- Logging Off the Embedded Web Server
- 6. Gateway's ini File Configuration
- Secured ini File
- Modifying an ini File
- The ini File Content
- The ini File Structure
- The ini File Example
- Networking Parameters
- System Parameters
- Web and Telnet Parameters
- Security Parameters
- RADIUS Parameters
- SNMP Parameters
- SIP Configuration Parameters
- Voice Mail Parameters
- ISDN and CAS Interworking-Related Parameters
- Number Manipulation and Routing Parameters
- E1/T1 Configuration Parameters
- Channel Parameters
- Configuration Files Parameters
- 7. Using BootP / DHCP
- 8. Telephony Capabilities
- Working with Supplementary Services
- Configuring the DTMF Transport Types
- Fax & Modem Transport Modes
- Event Notification using X-Detect Header
- ThroughPacket™
- Dynamic Jitter Buffer Operation
- Configuring the Gateway’s Alternative Routing (based on Conn
- Call Detail Report
- Supported RADIUS Attributes
- Trunk to Trunk Routing Example
- Proxy or Registrar Registration Example
- SIP Call Flow Example
- SIP Authentication Example
- 9. Networking Capabilities
- 10. Advanced PSTN Configuration
- 11. Advanced System Capabilities
- 12. Special Applications
- 13. Security
- 14. Diagnostics
- 15. SNMP-Based Management
- SNMP Standards and Objects
- Carrier Grade Alarm System
- Cold Start Trap
- Third-Party Performance Monitoring Measurements
- TrunkPack-VoP Series Supported MIBs
- Traps
- SNMP Interface Details
- SNMP Manager Backward Compatibility
- Dual Module Interface
- SNMP NAT Traversal
- SNMP Administrative State Control
- AudioCodes’ Element Management System
- 16. Configuration Files
- Appendix A. Selected Technical Specifications
- Appendix B. Supplied SIP Software Kit
- Appendix C. SIP Compliance Tables
- Appendix D. The BootP/TFTP Configuration Utility
- Appendix E. RTP/RTCP Payload Types and Port Allocation
- Appendix F. RTP Control Protocol Extended Reports (RTCP-XR)
- Appendix G. Accessory Programs and Tools
- Appendix H. Release Reason Mapping
- Appendix I. SNMP Traps
- Appendix J. Installation and Configuration of Apache HTTP Server
- Appendix K. Regulatory Information
SIP User's Manual 2. Physical Description
Version 5.0 27 October 2006
2 Physical Description
This section provides detailed information on the hardware components, the location and
functionality of the LEDs, buttons and connectors of the following products:
Mediant 2000 (refer to Section 2.1 below).
TP-1610 (refer to Section 2.2 on page 29).
TP-260 (refer to Section 2.3 on page 32).
2.1 Mediant 2000 Physical Description
The Mediant 2000 (shown in Figure 2-1 below) comprises the following components:
A 19-inch 1U high rack mount chassis (refer to Section 2.1.1 on page 28).
A single compactPCI™ TP-1610 board (refer to Section 2.2 on page 29).
A single TP-1610 Rear Transition Module (RTM) (refer to Section 2.2.2 on page 31).
A single available cPCI slot for an optional third-party CPU board (refer to Section
2.1.2 on page 31).
Figure 2-1: Mediant 2000 Front View
Table 2-1: Mediant 2000 Front View Component Descriptions
Item # Label Component Description
1
FAULT
Dual AC Power LED.
2
cPCI board locking screws.
3
cPCI latches.
4
TP-1610 cPCI board, 16-trunk configuration.
5
Status LED Indicators.
6
T1/E1 STATUS
E1/T1 Trunk Status LED Indicators.
7
ETH
Ethernet LED Indicators.
8
Reset button.
9
cPCI LED Indicators.
10
Power and Fan LEDs
11
An available cPCI slot for an optional third-party CPU board.