User`s manual

Mediant 2000 & TP-1610 & TP-260
SIP User's Manual 186 Document #: LTRT-68805
Table 6-10: Number Manipulation and Routing Parameters (continues on pages 180 to 188)
ini File Field Name
Web Parameter Name
Valid Range and Description
SourceNumberMapIP2Tel
[Source Phone Number
Manipulation Table for
IPÆTel calls]
Manipulate the source number for IP to Tel calls.
SourceNumberMapIP2Tel = a,b,c,d,e,f,g,h,i
a = Source number prefix
b = Number of stripped digits from the left, or (if brackets are used) from
the right. A combination of both options is allowed.
c = String to add as prefix, or (if brackets are used) as suffix. A
combination of both options is allowed.
d = Number of remaining digits from the right
e = Q.931 Number Plan
f = Q.931 Number Type
g = Destination number prefix
h =Calling number presentation (0 to allow presentation, 1 to restrict
presentation)
I = Source IP address (obtained from the Request-URI in the INVITE
message).
The ‘b’ to ‘f’ and ‘h’ manipulation rules are applied if the called and calling
numbers match the ‘a’, ‘g’ and ‘I’ conditions.
The manipulation rules are executed in the following order: ‘b’, ‘d’ and ‘c’.
Parameters can be skipped by using the sign ‘$$’, for example:
SourceNumberMapIP2Tel =01,2,972,$$,0,$$,034,1
SourceNumberMapIP2Tel =03,(2),667,$$,$$,0,22
Note: The Source IP address can include the ‘x’ wildcard to represent single
digits. For example: 10.8.8.xx represents all the addresses between 10.8.8.10
to 10.8.8.99. The ‘*’ wildcard represents any number between 0 and 255, e.g.
10.8.8.* represents all the addresses between 10.8.8.0 and 10.8.8.255.
For ETSI ISDN variant, the following Number Plan and Type combinations (Plan/Type) are supported in the
Destination and Source Manipulation tables:
0,0 = Unknown, Unknown
9,0 = Private, Unknown
9,1 = Private, Level 2 Regional
9,2 = Private, Level 1 Regional
9,3 = Private, PISN Specific
9,4 = Private, Level 0 Regional (local)
1,0 = Public(ISDN/E.164), Unknown
1,1 = Public(ISDN/E.164), International
1,2 = Public(ISDN/E.164), National
1,3 = Public(ISDN/E.164), Network Specific
1,4 = Public(ISDN/E.164), Subscriber
1,6 = Public(ISDN/E.164), Abbreviated
For NI-2 and DMS-100 ISDN variants the valid combinations of TON and NPI for calling and called numbers are
(Plan/Type):
0/0 - Unknown/Unknown
1/1 - International number in ISDN/Telephony numbering plan
1/2 - National number in ISDN/Telephony numbering plan
1/4 - Subscriber (local) number in ISDN/Telephony numbering plan
9/4 - Subscriber (local) number in Private numbering plan
SecureCallsFromIP
[IP Security]
0 = Gateway accepts all SIP calls (default).
1 = Gateway accepts SIP calls only from IP addresses defined in the Tel to IP
routing table. The gateway rejects all calls from unknown IP addresses.
For detailed information on the Tel to IP Routing table, refer to Section
5.5.5.1
on page 70.
Note: Specifying the IP address of a Proxy server in the Tel to IP Routing table
enables the gateway to only accept calls originating in the Proxy server and
rejects all other calls.