User`s manual

SIP User's Manual 6. Gateway's ini File Configuration
Version 5.0 171 October 2006
Table 6-8: Voice Mail Configuration Parameters (continues on pages 170 to 171)
ini File Field Name
Web Parameter Name
Valid Range and Description
DigitPatternForwardOnD
ND
[Forward on Do Not Disturb
Digit Pattern]
Determines the digit pattern used by the PBX to indicate ‘call forward on do not
disturb’.
The valid range is a 120-character string.
DigitPatternForwardNoR
eason
[Forward on No Reason
Digit Pattern]
Determines the digit pattern used by the PBX to indicate ‘call forward with no
reason’.
The valid range is a 120-character string.
DigitPatternInternalCall
[Internal Call Digit Pattern]
Determines the digit pattern used by the PBX to indicate an internal call.
The valid range is a 120-character string.
DigitPatternExternalCall
[External Call Digit Pattern]
Determines the digit pattern used by the PBX to indicate an external call.
The valid range is a 120-character string.
Serial parameters (applicable only to the SMDI application).
SerialBaudRate
Determines the value of the RS-232 baud rate.
The valid range is: any value.
It is recommended to use the following standard values:
1200, 2400, 9600 (default), 14400, 19200, 38400, 57600, 115200.
SerialData
Determines the value of the RS-232 data bit.
7 = 7-bit.
8 = 8-bit (default).
SerialParity
Determines the value of the RS-232 polarity.
0 = None (default).
1 = Odd.
2 = Even.
SerialStop
Determines the value of the RS-232 stop bit.
1 = 1-bit (default).
2 = 2-bit.
SerialFlowControl
Determines the value of the RS-232 flow control.
0 = None (default).
1 = Hardware.