User`s manual

Table Of Contents
SIP User's Manual Notices
Version 5.0 17 October 2006
Notices
Notice
This document describes the release of the AudioCodes Mediant 2000 SIP gateway, TP-1610
SIP cPCI board, and TP-260 SIP PCI board.
Information contained in this document is believed to be accurate and reliable at the time of
printing. However, due to ongoing product improvements and revisions, AudioCodes cannot
guarantee accuracy of printed material after the Date Published nor can it accept responsibility
for errors or omissions. Updates to this document and other documents can be viewed by
registered Technical Support customers at www.audiocodes.com under Support / Product
Documentation.
© Copyright 2006 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: Oct-9-2006 Date Printed: Oct-12-2006
Tip: When viewing this manual on CD, Web site or on any other electronic
copy, all cross-references are hyperlinked. Click on the page or section
numbers (shown in blue) to reach the individual cross-referenced item
directly. To return back to the point from where you accessed the cross-
reference, press the ALT and keys.
Trademarks
AC logo, Ardito, AudioCoded, AudioCodes, AudioCodes logo, IPmedia, Mediant,
MediaPack, MP-MLQ, NetCoder, Stretto, TrunkPack, VoicePacketizer and VoIPerfect, are
trademarks or registered trademarks of AudioCodes Limited. All other products or
trademarks are property of their respective owners.
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed
of with unsorted waste. Please contact your local recycling authority for disposal of this
product.
Customer Support
Customer technical support and service are provided by AudioCodes’ Distributors,
Partners, and Resellers from whom the product was purchased. For Customer support for
products purchased directly from AudioCodes, contact support@audiocodes.com
.
Abbreviations and Terminology
Each abbreviation, unless widely used, is spelled out in full when first used. Only industry-
standard terms are used throughout this manual. Hexadecimal notation is indicated by 0x
preceding the number.