User`s manual

SIP User's Manual 5. Web Management
Version 5.0 119 October 2006
Figure 5-49: Finish Screen
Figure 5-50: End Process Screen
10. Click the End Process button; the ‘Quick Setup’ screen appears and the full Web
application is reactivated.
5.8.2 Auxiliary Files
The ‘Auxiliary Files’ screen enables you to load to the gateway the following files: CAS,
Call Progress Tones, Voice Prompts, Prerecorded Tones (PRT) and User Information. For
detailed information on these files, refer to Section
16 on page 329. For information on
deleting these files from the gateway, refer to Section
5.7.4 on page 113.
Table
5-16 presents a brief description of each auxiliary file.
Table 5-16: Auxiliary Files Descriptions
File Type Description
CAS Up to 8 different CAS files containing specific CAS protocol definitions.
These files are provided to support various types of CAS signaling.
Voice Prompts The voice announcement file contains a set of Voice Prompts to be played by the
gateway during operation.
Call Progress Tones This is a region-specific, telephone exchange-dependent file that contains the Call
Progress Tones levels and frequencies that the VoIP gateway uses. The default CPT
file is: U.S.A.
Prerecorded Tones The dat PRT file enhances the gateway’s capabilities of playing a wide range of
telephone exchange tones that cannot be defined in the Call Progress Tones file.
User Information The User Information file maps PBX extensions to IP numbers. This file can be used
to represent PBX extensions as IP phones in the global ‘IP world’.