User`s manual

SIP User's Manual 5. Web Management
Version 5.0 117 October 2006
4. Click the Browse button, navigate to the cmp file and click the button Send File; the
cmp file is loaded to the gateway and you’re notified as to a successful loading (refer
to Figure 5-46).
Figure 5-46: cmp File Successfully Loaded onto the Gateway Notification
5. Note that the four action buttons (Cancel, Reset, Back, and Next) are now activated
(following cmp file loading).
You can now choose to either:
• Click Reset; the gateway resets, utilizing the new cmp you loaded and utilizing
the current configuration files.
• Click Cancel; the gateway resets utilizing the cmp, ini and all other configuration
files that were previously stored in flash memory. Note that these are NOT the
files you loaded in the previous Wizard steps.
• Click Back; the ‘Load a cmp File’ screen is reverted to; refer to Figure 5-45.
• Click Next; the ‘Load an ini File’ screen opens; refer to Figure 5-47. Loading a
new ini file or any other auxiliary file listed in the Wizard is optional.
Note that as you progress, the file type list on the left indicates which file type loading is in
process by illuminating green (until ‘FINISH’).
Figure 5-47: Load an ini File Screen