User`s manual

Mediant 2000 & TP-1610 & TP-260
SIP User's Manual 114 Document #: LTRT-68805
5.7.5 Viewing the Ethernet Port Information
The Ethernet Port Information screen provides read-only information on the Ethernet
connection used by the gateway. The Ethernet Port Information parameters are displayed
in Table
5-15. For detailed information on the Ethernet redundancy scheme, refer to
Section
9.2 on page 229. For detailed information on the Ethernet interface configuration,
refer to Section
9.1 on page 229.
¾ To view the Ethernet Port Information parameters:
 Open the ‘Ethernet Port Information’ screen (Advanced Configuration menu >
Network Settings > Ethernet Port Information option); the ‘Ethernet Port
Information’ screen is displayed.
Figure 5-43: Ethernet Port Information Screen
Table 5-15: Ethernet Port Information Parameters
Parameter Description
Active Port Shows the active Ethernet port (1 or 2).
Port 1 Duplex Mode Shows the Duplex mode Ethernet port 1 is using (Half Duplex or Full Duplex).
Port 1 Speed Shows the speed, in Mbps, that Ethernet port 1 is using (10 or 100 Mbps).
Port 2 Duplex Mode Shows the Duplex mode Ethernet port 2 is using (Half Duplex or Full Duplex).
Port 2 Speed Shows the speed, in Mbps, that Ethernet port 2 is using (10 or 100 Mbps).