User`s manual

SIP User's Manual 5. Web Management
Version 5.0 109 October 2006
Table 5-13: Call Counters Description (continues on pages 108 to 109)
Counter Description
Number of Failed Calls
due to a Busy Line
This counter indicates the number of calls that failed as a result of a busy line. It is
incremented as a result of the following release reason:
GWAPP_USER_BUSY (17)
Number of Failed Calls
due to No Answer
This counter indicates the number of calls that weren’t answered. It is incremented as a
result of one of the following release reasons:
GWAPP_NO_USER_RESPONDING (18)
GWAPP_NO_ANSWER_FROM_USER_ALERTED (19)
And (when the call duration is zero) as a result of the following:
GWAPP_NORMAL_CALL_CLEAR (16)
Number of Failed Calls
due to No Route
This counter indicates the number of calls whose destinations weren’t found. It is
incremented as a result of one of the following release reasons:
GWAPP_UNASSIGNED_NUMBER (1)
GWAPP_NO_ROUTE_TO_DESTINATION (3)
Number of Failed Calls
due to No Matched
Capabilities
This counter indicates the number of calls that failed due to mismatched gateway
capabilities. It is incremented as a result of an internal identification of capability
mismatch. This mismatch is reflected to CDR via the value of the parameter
‘DefaultReleaseReason’ (default is GWAPP_NO_ROUTE_TO_DESTINATION (3)), or
by the GWAPP_SERVICE_NOT_IMPLEMENTED_UNSPECIFIED(79) reason.
Number of Failed Calls
due to Other Failures
This counter is incremented as a result of calls that fail due to reasons not covered by
the other counters.
Percentage of
Successful Calls
The percentage of established calls from attempted calls.
Average Call Duration
[sec]
The average call duration of established calls.
Attempted Fax Calls
Counter
This counter indicates the number of attempted fax calls.
Successful Fax Calls
Counter
This counter indicates the number of successful fax calls.
5.7.1.3 Call Routing Status
The Call Routing Status screen provides you with information on the current routing
method used by the gateway. This information includes the IP address and FQDN (if used)
of the Proxy server the gateway currently operates with.
Figure 5-37: Call Routing Status Screen
Table 5-14: Call Routing Status Parameters
Parameter Description
Current Call-Routing Method
Proxy = Proxy server is used to route calls.
Routing Table preferred to Proxy = The Tel to IP Routing table takes
precedence over a Proxy for routing calls (PreferRouteTable = 1).
Routing Table = The Tel to IP Routing table is used to route calls.
Current Proxy
Not Used = Proxy server isn’t defined.
IP address and FQDN (if exists) of the Proxy server the gateway currently
operates with.
Current Proxy State
N/A = Proxy server isn’t defined.
OK = Communication with the Proxy server is in order.
Fail = No response from any of the defined Proxies.