Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 96
3. Add a Trunk Group
The next step is to add a trunk group for our trunk connections to the Mediant Mediant Gateway.
For this test, we used trunk group 3 for the Q.SIG trunk to the Mediant 1000.
Note: What are the existing signaling groups?
You can view the existing signaling-groups by executing a list signaling-group
command.
1 Enter the add trunk-group x command, where x is an available trunk group number.
2 On page 1 of the trunk group form, configure the following:
Group Type
isdn.
Group Name
Enter a meaningful name
TAC
Enter a Trunk Access Code that does not conflict with the existing dialing plan
COR
Enter a class of restriction that will allow trunk to trunk transfers (for purposes of
this example COR 1 is unrestricted)
Service Type
tie
3 (Conditional) If you have a Carrier Medium field, set it to PRI/BRI. This field was not
available in the 5.2 system but may be available on other system versions.
4 On page 2 of the trunk group form, ensure: