Specifications

1725-86914-000_C.docx
September 2013 93
Chapter 10: Expanding your System
Adding a Second Trunk Group on the Same PBX
One method of expansion is to simply add another Mediant Gateway with one T1 module. This
section covers the configuration of the two-Mediant Gateway system.
Admin Tip: Configuring the second Mediant Gateway
In this configuration, the second Mediant Gateway is configured just like the first one.
Only PBX changes are needed.
Admin Tip: Allocate a second PRI card in the PBX
You will need to install or allocate a second PRI card in the PBX for this configuration.