Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 91
7. Change the Automatic Alternate Routing Table
Next we want to change the Automatic Alternate Routing table to tell the system that anytime
someone dials 70xx, we want to send that call out the PRI to the AudioCodes Mediant Gateway.
1 Enter the command change aar analysis x.
2 Add these parameters:
Dialed String
Enter as much of the unique pattern as you can easily define. If I wanted all
7xxx numbers to go out this PRI, I would just use a 7. If all calls to 701x
were to go out this PRI I would use 701. This test used 70.
Total Min and Max
Enter the total number of digits in the extensions' length
Route Pattern
Enter a unique number which will be used to create the route pattern in the
next step. If you are unsure, cancel the current command and use the
command list route pattern. Then define the next available number.
Call Type
aar