Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 90
6. Set up Dialing Parameters
Now we need a way to send calls intended for stations connected to the Mediant Gateway out
the PRI. There are many ways to setup a dialplan in an Avaya system and detailing all of them
is beyond the scope of this document. For our example we will assume that all calls intended for
stations with a pattern of 70xx as their extension number will be sent out the PRI to the
AudioCodes Mediant Gateway .
First, we need to ensure that the number range we wish to use is defined as a number we want
the system to look at the aar analysis tables to decide how to route.
1 Enter the command change dialplan analysis.
2 For extensions with the format 7xxx, add a string to tell them to look at the aar table for
information on which trunk group and route patterns to use to route the call.