Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide

1725-86914-000_C.docx

September 2013 89

5. Change Signaling Group

Now we must go back and change the signaling group. You might say "Why didn't we just add

these fields to the signaling group when we created it?" Unfortunately, we have a bit of a

chicken and egg problem. We can't select the trunk group for channel selection until we've

created the trunk group, but we can't create the trunk group without specifying the signaling

group that the trunk members will use.

1 Enter the command change signaling-group x, where x is the signaling group number

you created above when you modified the signaling group.

2 Change the following fields:

Trunk Group for Channel

Selection

Enter the number of the trunk group configured in Step 3

Max Number of NCA

TSC: 12

Max Number of CA TSC

Trunk Group for NCA- TSC

Enter the number of the Trunk Group configured in Step 4.